User's Manual

Accessory lnstallation
Attaching the Battey
1.Turn off the radio.
2.Insert the tabs at the bottom of the battery intothe slots at the
bottom of the radio chassis.
3.Press the top of the battery towards the radio until a click is
heard.(See Figure 1)
Removing the Battery
1.Turn off the radio.
2.Push the battery latch on the back panel towards the top of the
radio.
3.Pull the top of the battery away from the radio chassis, and lift
the battery from the radiio.(See Figure2)
1.Align the grooves of the belt clip those of the battery.
2.Press the belt clip downwards until the belt clip tab locks.
(See Figure 4)
Note: attach the belt clip before installing the battery.
Removing the antenna
1.Turn the antenna counterclockwise until you can remove it.
(See Figure 3)
Attaching the Belt Clip
Figure1
Figure2
Attach
Remove
Figure 3
Figure 4
Attaching the antenna
1. Align the threaded end of the antenna with the Radio’s antenna
connector.
2. Turn the antenna clockswise to tighten.(See Figure 3)