User's Manual
1. Turn on the radio: Turn the Power/Volume Control Knob clockwise
until a "click" is heard.
2. Adjust the volume:Turn the Power/Volume Control Knob to adjust
the volume.When function key is programmed with monitor feature,
turn the knobwhile holding down the function key to adjust thevolume
to a comfortable level.
3. Select a Channel: Rotate Channel Selector knob to select
your desired channel.
4. Transmit: Hold down the [PTT] key ,speak into the microphone
with normal voice. Keep microph one about 5cm away from
your mouth.
5. Receive: Release the [PTT] key, the radio returns to receive mode.
Note: when battery voltage becomes too low, transmission
will stop and radio LED flashes red. Please refer to "Low
Battery Alert" for more details.
Basic Operation
Squelch Tail Elimination
The function will minimize the annoying audio outputs that occur at
the receiver on completion of a transmission to relieve the fatigue of
you ears.
Time-Out-Timer(TOT)
The Time-Out-Timer(TOT) is used to prevent someone from using
the same channel for a long time and to prevent the radio from
damage due to continuous transmission.
If the transmission exceeds the preset time (it's set by your dealer),
transmission will be inhibited and a beep tone will sound.To stop the
beep tone, release the [PTT] key .Press the [PTT] key again to
resume transmitting.
Features
TOT Reset Time
When this feature is activated,TOT won't reset until the preset
TOT Reset Time (it's set by your dealer) expires,even if you h
ave released the [PTT] key.
VOX Operation
Conecting a VOX Headset
1. Turn off your radio
2. Connecting the VOX accessory to your radio and turn the radio on.
Note:
1. Before you use VOX operation, it need to be enabled by PC
programming software.
2. Pressing the PTT button disables VOX.
Channel Annunciation
When you rotate the channel selector, the current channel number
will be heard.
Key function programmable
Your dealer may program the Function Key(long or short press)
with one of the following auxiliary functions respectively.
Monitor/Monitor monentary/Squelch off/Squelch off Monentary
/Channel Lock/Power Level/Battery Indicator/Scan/VOX