User's Manual

18
Troubleshooting
Trouble Solution
Cannot power on the radio.  The battery has run out. Please recharge
the battery or replace it with a new one.
 The battery may not be properly installed.
Remove the battery and attach it again.
The operating time is noticeably shorter
than normal performance, even though
the battery is properly charged.
 The battery has worn out, and it is time to
buy a new battery.
 The battery is not fully charged. Make sure
the charge indicators glow green.
Cannot talk to or hear group members.  Make sure all members are on the same
digital/analog Channel setting.
 Make sure you are within their
communication range.
Non-group members voice are present
on the channel
 Send the radio to your dealer to change
your CTCSS/CDCSS settings, and so as your
group members.
No voice or low voice while transmitting  Make sure the volume is turned up to its
maximum value.
 Send the radio to your dealer for
microphone examination.
Noise always on  Group members are too far away to receive
their call. Please go within the communication
range and re-power on the radio to try.
 Reset the Squelch Level by your dealer.