User's Manual

7
LCD Icon
Icon Name Icon Radio status
RSSI No signal
More bars indicate better
signal strength
Message New message/unread message
InBox is full
Scan
Scanning is in progress
Scanning pauses on a non-priority channel
Scanning pauses on Priority Channel 1
Scanning pauses on Priority Channel 2
Battery Strength More bars indicate more battery power
Monitor The Monitor feature is active
Speaker The speaker is unmated.
Emergency The Emergency mode (other than secret emergency) is active or an
emergency message is received
Encrypt The Encrypt feature is active
O p e r a t i o n Mode
DM
Direct Mode: Under this mode, radios communicate with each other
directly
RM
Repeater Mode: Under this mode, radios communicate with each
other via a repeater
The functions of the LEDs and beeps Table
Power on When the radio is turned on, the power on alert tone
sounds and status Indicator flashes red. When the current
channel is a blank channel, the radio sounds beep tone
continuously.
Power off When the radio is turned off, the power off alert is heard.
Low battery alert Status Indicator flashes red, and a Di-Di-Di tone sounds at
intervals of 10 seconds.