ASSEMBLY AND INSTALLATION INSTRUCTIONS WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE, NOTE: 1. Before installing, consult local electrical codes for wiring requirements. 2. Please rad theses instructions carefully before installing this fixture. f you are not familiar with installations, please consult a qualities electrician. 3. Do not install this lighting system in a damp or wet location. 4.
Rail Installation: 1 Carefully take put the rail fom the package. Place (e tall a8 shown in Rigid There has a grounding striping the top of the rail, and two other: brass strips placed al each side of the rail. 2 Unscrew the caps from one pres tightened tall supports, then separate it 3 Attach the rail. while making certain the grounding strip are facing toward ceiling, securely Into the main tall support, as shown in Fig 5. 4.
1. Choose one spot light, unscrews the caps from the counselor of spot light, then separate the connector apart. CAUTION: Be careful not to snap the wires while separating the connector, this will saute the wires to disconnect 2. Attach the main part of the connector onto the rail. Make sure the slot of the connector filch root the rail: Then put Beth halves of the connector back together, and then screw the caps and plastic screws ‘onto the connector tightly (See Fig.
