Installation Instructions

INSTRUCTIONS

FOR ITEM: 349-6100 / 6102 / 6103 / 6104

UANTUS

Bulb installation and spotlight head adjustment:

NOTE: Please refer to the box for the instructions on the light and track assembly.

1. Pull the cap out from the housing. (See Fig.1)

2. Install a bulb (Included). (See Fig.2)

Carefully place the bulb (GU10 BASE MR16C BULB ONLY) to the cap as shown in Fig.2. Locate

it into position by using the clip of the cap.

3. Pull the socket out. Insert and twist the bulb assembly into the socket. (See Fig.3)

4. Carefully put the bulb assembly to the housing. (See Fig.4)

Note: Adjust the spotlight head to a desired position by using the swivel.

WARNIGN: To avoid the risk of injury, be sure to turn off electrical

power while installing or servicing the spotlight.

Fig.1 Fig.2 Fig.3 Fig.4

Swivel

Housing

Cap

Bulb Assembly

Socket

Clip

Bulb (Included)

Housing