User's Manual

+: means forwarder offset , which TX frequency will higher than
RX frequency
-: means opposite offset, which TX frequency will lower than
RX frequency
Offset: UHF has 0-70.125M available, VHF has 0-38M
available
SFT frequency
short press the channel knob or Menu key to enter the menu ,
using the channel knob or ↑↓key to choose the desired
one ,( it will be blue) press confirm key and exit
UHF:0-70.0MHz available
VHF:0-38.0MHz available
TX frequency
Enter the menu, to choose the TX frequency setting, short press
the menu key to enter and then choose the desired setting, using
the channel knob to choose Desired frequency ,press confirm
key and exit
Step
Enter the menu , to choose the STEP setting , short press the
menu key to enter and then choose the desired setting, using the
channel knob to choose Desired item ,press confirm key and exit
Available values:2.5k/5k/6.25k/10k/12.5k/20k/25k/30k