Specifications

Author affiliation: 1 School of Materials Science and Engineering, Xi'an University of
Technology, Xi'an 710048, China
2 Shaanxi University of Technology, Hanzhong 723000, China
3 Xi'an Gemei Metal Material Co. Ltd., Xi'an 710021, China
Corresponding author: Wang, H. ([e-mail])
Source title: Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment
Abbreviated source title: Cailiao Rechuli Xuebao
Volume: 34
Issue: 7
Issue date: July 2013
Publication year: 2013
Pages: 124-128
Language: Chinese
ISSN: 10096264
CODEN: JRXUDO
Document type: Journal article (JA)
Publisher: Editorial Office of Transactions of Materials, 18 Xueqing Road, Beijing, 100083, China
Abstract: Accumulative roll bonding (ARB) process for preparation of
titanium-zirconium-molybdenum(TZM)alloy plate was investigated by theoretical analysis and
experiments. The deformation resistance and the rolling force ARB process were calculated. The
variations of tensile strength and microstructure of the ARB TZM alloy plate with ARB
deformation were examined. The results show that the maximum tensile strength and the best
interface bonding is obtained for the TZM plate after the accumulative roll bonding for three
times. The grains are obviously refined to the size of 200-500 mm as the accumulative
deformation increases. Additionally, the grains are elongated and the grains tend to be
homogeneously distributed on the cross section of the plate, which are perpendicular to the
rolling direction. The tensile strength of the TZM alloy plate manufactured by the ARB process
increases by 50% of that of the base metal, with the maximum tensile strength and elongation of
968 MPa and 2%, respectively.
Number of references: 7
Main heading: Roll bonding
Controlled terms: Alloys - Deformation - Tensile strength - Zirconium
Uncontrolled terms: Accumulative roll bonding - Accumulative roll bonding (ARB) process
- Deformation resistance - Grain refining - Interface bonding - Rolling direction -
Rolling load - Strength and elongations
Classification code: 421 Strength of Building Materials; Mechanical Properties - 422
Strength of Building Materials; Test Equipment and Methods - 531.1 Metallurgy - 535.1
Metal Rolling - 549.3 Nonferrous Metals and Alloys excluding Alkali and Alkaline Earth Metals
Database: Compendex
Compilation and indexing terms, © 2013 Elsevier Inc.
11.
Accession number: 20133416634635
Title: A bijection between lattice-valued filters and lattice-valued congruences in residuated
lattices