Getting Started Guide

31
Basic OperationBasic Operation
Dual Display: Using Areas “A” and “B”
e KG-1000G is two radios in one! e dual display function allows you to monitor
two channels at the same time. While this may sound complex, the KG-1000G is de-
signed to make this powerful feature easy to use.
e display is divided in half with the left side referred to as “Area A” and the right side
referred to as “Area B”. Each area controls a separate radio. A down arrow indicator
above the channel/frequency indicates which area is primary. When you perform an
operation on the radio, such as changing channels or transmitting, that operation is
performed on the currently active area.
Turning the Dual Display On and O
By default the dual display is o on the KG-1000G. When o, instead of a frequency
or channel name the word “WOUXUN” will be displayed in the inactive area.
Use the TDR function to toggle between a single and dual display. By default, the TDR
function is assigned to Hotkey “C”, but it can also be activated by pressing the number
8 key on the hand microphone (labeled TDR).