Getting Started Guide
39
Basic OperationBasic Operation
▪
1. When the 6th digit is 0 or 5, then the 7th and 8th digits will be 0.
▪
2. When the 6th digit is not 0 or 5, the 7th and 8th digits will be 25, 50 or 75 ac-
cording to the 6.25k step frequency of the 5th digit.
If press any other keys except 0-9 are pressed while entering the 6-digit frequency, it
will exit the frequency setting.
In channel mode, press the [MHZ] key to tune to a specic channel number. e rst
digit of the current channel number will begin ashing. Enter the desired channel num-
ber using 3 digits. For example if you would like channel 9, enter 009.
(3) [B/SW] Band Switching Hotkey
e KG-1000G can receive signals on multiple bands and frequency ranges.
In frequency mode, press the [B/SW] key on the hand microphone to switch the
current band. Area A (left side) supports all available bands. Area B (right side) has 2
selectable bands: 136-174.995 MHz and 400-479.995 MHz.