Getting Started Guide

Advanced OperationAdvanced Operation

RPT to create a directional repeater.

T-W RPT: Two way (transmit/receive) mode. Set both radios into this mode to

operate as a two-way repeater.

2. Connect these two transceivers with the 8 pin data cable (model SCO-002) sup-

plied with the radios to the PC (programming) interface port located on the left

side of each radio. is is the port with a rubber cover marked PC.

3. Connect an antenna to each unit, with ample

distance between the two aerials to prevent

signal cancellation or cross interference. Al-

ternatively a duplexer and single antenna can

be used.

e two radios can now operate as together as one

repeater.

When the KG-1000G is operating in repeater

mode, the screen will display the repeater icon.