Getting Started Guide

Troubleshooting

Problem Solution

Cannot activate Scan Check if the scan group channel or Scan Add function

is turned on.

Transceiver automatically

shuts o

▪

Check if your power source is below 11.5 volts.

▪

Check if APO menu setting is activated.

Transceiver does not trans-

mit or receive

Check if transceiver has been stunned or killed.

Repeater mode not work-

ing

Be sure the A/B area is set for the repeater’s correct

operating frequency.

Cannot transmit in repeat-

er mode

Check to see if the receivers squelch and CTCSS /

DCS settings are correct.