User Manual

Prestige
®
2 Wall
Installation System
Installation just got simple!
Quartet Prestige 2 boards have a new, unique and easy Wall
Installation System! The (A) installation shelf and (B) pass-through
mounting allows you to simply mount your board to the wall
without any hassle or frustration!
Steps:
Hardware Included.
The installation shelf is an “L” shaped bracket that has a top shelf and
holes where it will be installed into the wall. Place the bracket flush
against the wall. Make certain it is level and mark the installation holes.
Remove the bracket and drill holes into the wall.
Insert the wall anchors.
Tightly screw the bracket into the wall so it is secure.
Place the board on top of the bracket and flush against the wall.
Mark each installation point on the wall, through the exposed corners.
Remove the board and drill the installation points into the wall.
Install the wall anchors.
Place the board back on the shelf and tightly screw it into the wall so it
is secure.
Place the corner caps on. The board is now installed!
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
Full length tray
“L” Shaped
Installation Shelf
Corner Cap
Screw
Anchor
A
Pass-Through
Mounting
B