Specifications

Wall Mounting
The unit can be mounted on a wall using the supplied mounting fittings. To mount the
unit on a wall, take the following steps:
The supplied screws are intended
for use on a thick wooden wall or
wooden column. Do not use
them on any other materials.
There is a danger that the unit
may come off.
1 Install the two larger screws into a wall
3.94 inches (10 cm) apart. Be sure to keep
about 0.12 inch (3 mm) of the screw head
out of the wall.
2 Mount the wall mount fittings
as shown on the right.
Environmental Conditions
Avoid placing the unit in environments that are:
•
humid or dusty
•
exposed to direct sunshine
•
subject to frequent or continuous vibrations
•
outside the temperature range between -5° and 45°C
•
affected by chemicals or ozone
3.94" (10cm)
0.12"
(3mm)
6