Time Clock User Manual

DAY ADV.TIME D.S.T PROGRAM EXT.ALARM
SET
PAY ENDING
SELECT
YEAR
RED/BLK.
MONTH
EX.ALM
DAY
COL.
HOUR MINUTE SECOND/CARD
DATE/TIME
SU12Hr. TU SAFRTHWEMO
1/60
1/100
Setting the Pay Period
• The closing date is factory-set at the end of a month (31st).
• The PAY ENDING button stays lit up during its setting operation.
1 Remove the panel cover.
Make sure that PAY ENDING
stays lit up.
2 The closing date is shown at the
left on the display, and the card type
at the right.
The card type for monthly closing is
"00".
3 or to select date desired.
Example: If closing date is the 20th
every month, set the digits on the left at
"20".
4 Check the settings on the display
and press SET .
Monthly Closing
Closing date
Card type
00 Monthly closing
01 Weekly closing
02 Bi-weeky closing
DAY ADV.TIME D.S.T PROGRAM EXT.ALARM
SET
PAY ENDING
SELECT
YEAR
RED/BLK.
MONTH
EX.ALM
DAY
COL.
HOUR MINUTE SECOND/CARD
DATE/TIME
SU12Hr. TU SAFRTHWEMO
1/60
1/100
Always select the 31st in the case of
month-end closing, which is normally
factory-set unless you change the
setting.
9