Installation guide

Quasar CF-4251 User and Installation Guide
20
b. For indoor or outdoor installations using a protective camera housing
1. Support the camera housing and loosen sufficiently the tension bolt on the
bracket Pan/Tilt assembly so that it allows you to reposition the camera housing.
Figure 19: Camera Housing Repositioning
2. Move the housing so that the camera field of view is optimized for your scene
and retighten the tension bolt on the wall bracket Pan/Tilt assembly.
3. On the camera, adjust the zoom ring and focus ring on the lens for your scene. If
you have a manual Iris, also adjust the iris ring on your lens. See Figure 18.
4. Adjust the camera and base plate by moving it either forward or backward so
that the camera lens close enough to the glass that it reduces the possibility of
reflection but does not make contact with the glass.
5. Tighten the base plate securely in place and close the camera housing lid.
6. Close the latch or tighten the screws firmly so that the lid seal is properly
maintained.