Installation guide

Quasar CF-4251 User and Installation Guide
46
 Send HTTP notification – Check this box to specify the destination HTTP address and
parameters for event notifications by the triggered alarm. When an alarm is triggered, the
notification will be sent to one of two specified HTTP servers. See figure below.
Figure 48: Application – Send HTTP Notification
File Name
 File Name – Enter a file name in the field, for example image.jpg. The uploaded image’s file
name format is set in this section. Select one that meets your requirements.
o Add date/time suffix
File name: imageYYMMDD_HHNNSS_XX.jpg
Y: Year, M: Month, D: Day
H: Hour, N: Minute, S: Second
X: Sequence Number
o Add sequence number suffix (no maximum value)
File name: imageXXXXXXX.jpg
X: Sequence Number
o Add sequence number suffix (limited value)
File Name: imageXX.jpg
X: Sequence Number
The file name suffix ends at the number being set. For example, if the setting is up to
“10,” the file name will start from 00, end at 10, and then start over again.
o Overwrite
The original image in the FTP site will be overwritten by the new uploaded file with a
static filename.
After entering all the settings, click Save.