Installation guide

Quasar CM-3211/CM-4221 Series User and Installation Guide
114
7. Right-click and select Browse to directly access the camera via a web browser. The
default web browser opens and requests access to the camera IP address.
Figure 101: Device Search Application – Select Browse
8. When the web browser contacts the camera IP, do the following:
a) Log in using the default user name Admin and password 1234.
Note:
ID and password are case-sensitive.
Note:
It is strongly advised that administrator’s password be altered for security
reasons.
b) If the Information Bar (just below the URL bar) prompts for permission to install the
ActiveX Control for displaying video in the browser (see the figure below), right-click
on the Information Bar. Select Install ActiveX Control to allow the installation.
Figure 102: Device Search Application – Select Install ActiveX Control
9. If a security warning window prompt appears, click Install.
Figure 103: Security Warning Window