Installation manual

CCM-3211 Series Installation Manual
108
MJPEG Q (Quality) factor
A higher value implies higher bit rates and higher visual quality. The default setting of MJPEG
Q factor is 35; the setting range is from 1 to 70. Click “Save” to confirm the setting.
NOTE: MJPEG is not supported by Latitude.
H.264-1/H.264-2 bit rate
The default setting of H.264-1/H.264-2 is 4096 kbps; the setting range is from 64 to 8192
kbps. Click “Save” to confirm the setting.
Display Compression Information
Users can also decide whether to display compression information on the Home page. Click
“Save” to confirm the setting.
CBR Mode Setting
The CBR (Constant Bit Rate) mode can be the preferred bit rate mode if the bandwidth
available is limited. It is important to take image quality into account when deciding to use
CBR mode. To operate the camera in Variable Bit Rate (VBR) mode, uncheck the CBR
checkbox. Click “Save” to confirm the setting.