Installation manual

CCM-3211 Series Installation Manual
111
NOTE: MJPEG is not supported by Latitude.
Click “Save” to confirm the settings.
6.4.4 Video Frame Rate
Video frame rate is for setting the frames per second (fps) if necessary. The setting page is
shown as below.
MJPEG/H.264-1/H.264-2 Frame Rate
The default setting of MJPEG Frame Rate is 30 fps (NTSC) or 25 fps (PAL). The setting range
for H-264-1 in NTSC is from 1 to 30 and 1 to 30 in PAL. The setting range for H-264-2 is
from 1 to 15 in NTSC and 1 to 13 in PAL. Click “Save” to confirm the settings.