Installation manual

CCM-3211 Series Installation Manual
127
Analytics
Motion Detection
On/Off, plus sampling pixel interval, detection level,
sensitivity level, and time interval settings.
Regions of Interest
Web interface: Configurable up to 10 ROI masks.
Latitude interface: Configurable up to six ROI masks.
Motion Metadata
Streaming and recorded video includes per frame level
motion metadata. Motion metadata is archive searchable by
ROI via the Latitude ControlCenter user interface.
Triggered Actions
Notifications, On-Event Recording and Relay Output
Command. Includes configurable alarms and broad range of
recording on detection of video and snapshots.
Tampering Alarm
On/Off, plus duration, on-event notification, recording to SD
card, and more are supported as events in Latitude.
Network
Interface
10/100Mbps Ethernet, Auto-sensing, Full/Half-Duplex
Protocol
IPv4/v6, TCP/IP, UDP, RTP, RTSP, HTTP, HTTPS, ICMP, FTP,
SMTP, DHCP, PPPoE, UPnP, IGMP, SNMP, QoS, and ONVIF
Password Levels
User and Administrator
Security
HTTPS, IP Filter, IEEE 802.1x
Internet Browser
Internet Explorer (6.0+), Chrome, Firefox, Safari
User Accounts
20
Mechanical
IR LED
Illuminator
(CM-3211-
10-I/11-I)
Working
Distance
50m
Wavelength
850nm
LEDs
24
Connectors
Power
3-pin terminal block
Ethernet
RJ-45
Micro SD
SDHC support. Supports up to 32GB MicroSD card (card not
included).
Audio
4-pin terminal block with audio input and audio output.
Alarm
4-pin terminal block with 2-pin alarm input and 2-pin relay
output.
Analog Video
1.0V p-p/75Ω, BNC (continuously enabled)
LED Indicator
Power, Link, ACT
Weatherproof Standard
IP66 on CM-3211-01, CM-3211-11, and CM-3211-11-I
Mechanical IR Cut Filter
On CM-3211-01, CM-3211-11, and CM-3211-11-I