Installation manual

CCM-3211 Series Installation Manual

4.) Press in the camera module flanges to unsnap the camera module from the base

plate.

4.6 Mounting Instructions

Following are mounting instructions for the CM-3211 series cameras.

4.6.1 IR Camera (CM3211-10-I & CM3211-11-I) Mounting

Tips

To eliminate the IR reflection it is mostly recommended to apply the following steps:

1. Clean the bubble from dirt and finger prints.

2. Make sure the bubble has no scratches.

3. Fasten the screw that secures the snap-in chassis in order to have the rubber sealed

against the bubble

4. Avoid aiming the IR where there are nearby objects closer than the scene of interest

which might reflect back into the lens.

4.6.2 Mounting the CM-3211-00, CM-3211-10, or CM-3211-

10-I Indoor Camera

1.) Do one of the following:

 For drilled wall or ceiling mounting:

a.) Use a pointed pencil and the base plate as a template to mark the mounting

surface through the plate holes where the four screw holes will need to be

drilled.

Important: Before marking and drilling the holes, ensure that the base plate

alignment is oriented correctly so that the required camera field of view can be

Module-

Flanges