Installation manual

CCM-3211 Series Installation Manual
21
4.) If you have not disabled the Windows Firewall, a security alert window will pop up.
Do the following:
a.) Click “Unblock” to continue. Latitude users should consult the Latitude
Installation Instructions on disabling the Windows Firewall.
b.) Click “Device Search” again. All the discovered IP devices will be listed in the
page, as shown in the figure below. The camera’s default IP address is:
192.168.0.250.
5.) Right-click on the camera whose network property you wish to change, and from
the menu that opens, select “Network Setup”. The “Network Setup” dialog
displays.
Tip: Record the camera’s MAC address for future identification.