Installation manual

CCM-3211 Series Installation Manual

8.) When the web browser contacts the camera IP, do the following:

a.) When prompted for the login, enter username and password for the camera in

the login prompt that appears.

The default login ID and password for the Administrator are:

Password

Admin

1234

NOTE: ID and password are case-sensitive.

b.) If the Information Bar (just below the URL bar) prompts for permission to

install the ActiveX Control for displaying video in the browser (see the figure

below), right-click on the Information Bar. Select “Install ActiveX Control…”

to allow the installation.

c.) If you receive a security warning window prompt, click “Install”.

d.) If the wizard appears for installing the component application DC Viewer,

follow the steps of the wizard to complete the installation.

NOTE: If you change the password and you are using the DVTel Latitude

AdminCenter Discovery feature, deselect all other proprietary types. Select “DVTel

HD Series” so that you can configure the new password in the <Discovery> tab

settings.

Additionally, users can change the camera’s network property (either DHCP or Static IP)

directly in the device finding list. Refer to the following section for changing the camera’s

network property.