Installation manual

CCM-3211 Series Installation Manual

Host Name

The host name is for camera identification. If the alarm function (see Application) is enabled

and is set to send an alarm message by Mail/FTP, the host name entered here is displayed in

the alarm message.

Time Zone

Select the time zone you are in from the drop-down menu.

Enable Daylight Saving Time

To enable DST, check the box and then specify time offset and DST duration. The format for

time offset is [hh:mm:ss]. For instance, if the amount of time offset is one hour, enter

“01:00:00” in the field.

Sync with Computer Time

Select this button to synchronize video date and time display with the PC.

Manual

The Administrator can set video date, time and day manually. Entry format should be

identical with that shown next to the Enter field.

Sync with NTP Server

Network Time Protocol (NTP) is an alternate way to synchronize your camera’s clock with an

NTP server. Specify the server you wish to synchronize in the Enter field. Then select an

update interval from the drop-down menu. For further information about NTP, visit