Installation manual

CCM-3211 Series Installation Manual
65
The Administrator can specify various alarm actions to be taken when an alarm is triggered.
The options are listed below.
 Enable Alarm Output
Select this box to enable alarm relay output.
 Record Stream to SD Card
Select this box in order to save the alarm-triggered recording into your Micro SD
card. Enter the number of seconds for the pre-trigger buffer. Select the first
radial button if you wish to upload for a specified length of time and enter the
number of seconds. Alternatively, select the second radial button to upload during
the active trigger.
NOTE: Make sure that local recording (with a Micro SD/SDHC card) is activated so
that this function can be implemented. See Recording for further details.
 Send Message by FTP/E-Mail
Select whether to send an alarm message by FTP and/or e-mail when an alarm is
triggered.