Installation guide

Quasar CM-4251 Series User and Installation Guide
108
8. When the web browser contacts the camera IP, do the following:
a. Log in using the default user name Admin and password 1234.
Note:
ID and password are case-sensitive.
Note:
It is strongly advised that administrator’s password be altered for security
reasons.
b. If the Information Bar (just below the URL bar) prompts for permission to install the
ActiveX Control for displaying video in the browser (see the figure below), right-click
on the Information Bar. Select Install ActiveX Control to allow the installation.
Figure 102: Device Search Application – Select Install ActiveX Control
9. If a security warning window prompt appears, click Install.
Figure 103: Security Warning Window
10. If the wizard appears for installing the component application DCViewer, follow the
instructions to complete the installation.
Note:
If the password is changed and DVTEL Latitude AdminCenter Discovery
feature is in use, deselect all other proprietary types. Select DVTEL HD
Series so that the new password can be configured in the Discovery
tab settings.
Additionally, you can change the camera’s network property (either DHCP or Static IP) directly in the
device finding list. Refer to the following section for changing the camera’s network property.