Installation manual

CM-4221 Installation Manual

4 Installation

Following are instructions for indoor and outdoor installation of the CM-4221 series cameras.

4.1 Indoor Installation

Read the instructions provided in this chapter thoroughly before installing the CM-4221-00,

CM-4221-10, or CM-4221-10-I. Following are additional considerations for indoor

installation:

 There must be a fuse or breaker at the starting point of the electrical wiring

infrastructure.

 For indoor installations, such as industrial applications, the camera must be

protected from elements such as damaging fumes, metallic dust, extreme

temperatures, soot, moisture, over spray, etc.

 Do not place the camera on or near radiators and heat sources.

 All electrical work must be performed in accordance with local regulatory

requirements.

4.2 Outdoor Installation

Read the instructions provided in this chapter thoroughly before installing the CM-4221-01,

CM-4221-11, or CM-4221-11-I camera. Following are additional considerations for outdoor

installation:

 For outside wiring installation, always use weatherproof equipment, such as

boxes, receptacles, connectors, etc.

 For electrical wiring, use the properly rated sheathed cables for conditions to

which the cable will be exposed (for example, moisture, heat, UV, physical

requirements, etc.).

 Plan ahead to determine where to install infrastructure weatherproof equipment.

Whenever possible, ground components to an outdoor ground.

 Use best security practices to design and maintain secured camera access,

communications infrastructure, tamper-proof outdoor boxes, etc.

 All electrical work must be performed in accordance with local regulatory

requirements.