Installation manual

CM-4221 Installation Manual
21
3.) In the Device Search application, click the “Device Search” button.
4.) If you have not disabled the Windows Firewall, a security alert window will pop up.
Do the following:
a.) Click “Unblock” to continue. Latitude users should consult the Latitude
Installation Instructions on disabling the Windows Firewall.
b.) Click “Device Search” again. All the discovered IP devices will be listed in the
page, as shown in the figure below. The camera’s default IP address is:
192.168.0.250.
5.) Right-click on the camera whose network property you wish to change, and from
the menu that opens, select “Network Setup”. The “Network Setup” dialog
displays.