Installation manual

CM-4221 Installation Manual
53
NOTE: For future identification, record the camera’s MAC address, which is found on
the camera label.
Use fixed IP address
To setup static IP address, select “Use fixed IP address” and move the cursor to the IP
address blank (as indicated below) and insert the new IP address, ex. 192.168.7.123. Then
go to the Default gateway field (explained later) and change the setting, for example
192.168.7.254. Press “Save” to confirm the new settings.
Users can login to the camera with a static IP address by using the “DeviceSearch” software
(see Accessing Camera) or entering the IP address in the URL bar and pressing “Enter”.