Network USB2.0 Device Server Over IP 4-Port USB2.0 Device User Manual

As soon as the transfer is completed, the USB device server automatically restarts to apply the
upgraded firmware settings.
c) Restore factory defaults
Right click on the USB device server under Server Manager Window and select the Restore
Factory Defaults function to obtain Default settings as shown below.
Then USBIP Admin Utility pops up a window asking for to continue or not. If we select Ok button
it will get default settings.
2.4. Printer Auto-Connect
USB Admin Utility enables Printers be shared between multiple clients making it a bidirectional
Print Server.
In order to share the printer between multiple clients, user may need to connect the printer at least
once to install the driver for the Printer.
Once the printer is enumerated disconnect the Printer form the Device Mapping Window, Select