Network USB2.0 Device Server Over IP 4-Port USB2.0 Device User Manual

a) Thread Status:
Thread
Session
Host
Action
b) Service Status:
Service
Status
Control
c) Device Status:
Vendor Id
Product Id
Class Id
Peer-IP address
Status
This status page is updated automatically every 10 seconds and it shows the device connected to
the USB device server.
The Device Status table shows the Vendor Id, Product Id, Class, Peer-IP and the Status of the
Device connected. The Peer-IP is the IP Address of the computer on which the device is currently
accessed. Whenever any Device is Busy the Status of that device changes to “BUSY” and
whenever it is not being used it changes to “FREE” as shown below.
3.5. Upgrade page.
The Upgrade page allows you to upgrade the firmware.
Select the file to be upgraded by click on the Browse option on the Upgrade page as shown below.