User`s manual

AirborneDirect™ Ethernet Client Bridge Quick Start Guide Quatech, Inc.
100-8108-100 10 May 2011
Step
Description
Select Telnet Port
This is the port used to access the Airborne device for
configuration, using a TCP/IP connection. If the Ethernet Client
uses port 23 this must be changed to an alternate port
number e.g. 8028.
Default Port: 23
Select Internal FTP Server Listen Port
This is the port on which the Airborne device’s FTP server is
listening. If the Ethernet Client supports a FTP server (on port
21) it is recommended this be changed to an alternate port
number e.g. 8021.
Default Port: 21
Select Secure Shell Server (SSH) Port
This is the port on which the Airborne device’s SSH server
listens. If the Ethernet Client supports direct SSH connections
(on port 22) it is recommended this be changed to an
alternate port number e.g. 8022.
Default Port: 22
Press Commit [Button]
Saves changes to the device.
Optional
Press Reload [Button]
Reloads the Express Settings page. Select this is you have
further configuration options to change.
Optional
Press Restart [Button]
Restarts the device. After the device as rebooted it will
attempt to authenticate to the configured network. As long as
the network is in range the wireless interface will connect.
If the network is using DHCP then an IP address will be
assigned to the WLAN interface and IP connectivity is possible
over the WLAN network.
If the network is using static IP addresses it will be necessary
to configure the network interface, see the next step.
The web interface supports advanced configuration of the device through the additional pages available. Please refer to the User’s Manual for
details.