User`s manual

AirborneDirect™ Ethernet Client Bridge Quick Start Guide Quatech, Inc.
100-8108-100 2 May 2011
Getting Started when no open Network available:
1
Open the AirborneDirect™ packaging and locate the Install CD.
2
Place the CD in the CD/DVD drive of the laptop or desktop you will be using to configure the
AirborneDirect™ device. Follow the on screen directions for installation of the appropriate device
software and documentation.
3
Connect the Ethernet cable on ABDG to an Ethernet port on the laptop or desktop system.
4
Apply power to the ABDG-BR-DP5XX/IN5XXX.
5
The unit will boot and display one of the following LED patterns:
ABDG-BR-DP5XX Not Associated
POWER:  Green
LINK :  Red (Periodic Blinking)
COMM:  Red
ABDG-BR-IN5XXX
COMM:  Off
LINK :  Off
POST:  Orange
POWER:  Blue
6
Run the Airborne Management System application. This was installed during the CD installation and a
menu item will be found in the Airborne folder located in the programs directory of your system.
When the application opens the following dialog will be displayed:
Select Group Name: manuf and enter Group Password: dpac
7
The AMC will load and discover the attached device.