User`s manual

AirborneDirect™ Ethernet Client Bridge Quick Start Guide Quatech, Inc.
100-8108-100 9 May 2011
Step
Description
Select Wireless LAN Connection Type
If you are using Access Points make sure this is set to
Infrastructure from the drop down menu.
If you want to use AdHoc set this accordingly. Additional
settings may be required to fully configure for AdHoc mode.
Select SSID
Enter the name of the wireless network you wish to access.
This field is case sensitive.
Select Wireless LAN Security Type
Select the security type the wireless network you wish to
access is using. Depending upon the option you choose you
may have to enter additional information. Once you have
selected the security type the required inputs will be made
accessible by un-graying the fields that must be completed.
If the security type is not in the available selections, more are
available in the WLAN Security Settings page. If you choose to
use this page make sure you commit the changes you have
already made before moving to the WLAN Security Settings
page.
Select WLAN DHCP
If your WLAN network uses DHCP to assign IP addresses to
the wireless clients, select Enabled from the drop down
menu.
If you are using static IP addresses select disabled from the
drop down menu. WLAN Static IP and WLAN Subnet Mask
will need to be entered.
Select Ethernet DHCP
Defines the IP address used to access the Client Bridge for
configuration is a static IP address.
Important: Do not change this parameter for correct bridge
operation.
Select WLAN Static IP
This field defines the static IP address for the wireless
interface.
This address is only used if the WLAN DHCP is disabled or
DHCP failed.
This value should match the static IP address given to the
Ethernet client.
Default: 0.0.0.0
Select WLAN Subnet Mask
This field defines the subnet mask used by the wireless
interface.
This mask is only used if the WLAN DHCP is disabled or
DHCP failed.
This value should match the static IP address given to the
Ethernet client.
Default: 255.255.0.0
Select Ethernet Static IP
This field defines the static IP address used to access the
Client Bridge for configuration. The default value reflects an
AutoIP fall back address.
Default: 169.254.2.100
Select Ethernet Subnet Mask
This field defines the subnet mask used to access the Ethernet
Client for configuration. The default value reflects the subnet
mask used by AutoIP fallback addressing.
Default: 255.255.0.0
Select Gateway IP Address
This field defines the IP address of the gateway on the WLAN
network.
This value should match the static Gateway IP address given
to the Ethernet client.
Default: 0.0.0.0
Select Web Server Port
This is the port on which the Airborne device’s web server is
listening.
Important: If it is expected that the Ethernet Client will be
accessing, on the WLAN network, resources on port 80 this be
changed to an alternate port number e.g. 8080.
Default Port: 80