Specifications

Index
Page 50 Airborne™ Product Family CLI Reference Guide 100-8005-101G
Quatech, Inc. Confidential
wl-dhcp, 20
wl-dhcp-acqlimit, 21
wl-dhcp-client, 21
wl-dhcp-fb, 21
wl-dhcp-fbgateway, 22
wl-dhcp-fbip, 22
wl-dhcp-fbsubnet, 22
wl-dhcp-interval, 21
wl-dhcp-mode, 21
wl-dhcp-rel, 20
wl-dhcp-renew, 21
wl-dns, 21
wl-dns1, 21
wl-dns2, 21
wl-gateway, 20
wl-ip, 20
wl-key-1, 24
wl-key-2, 24
wl-key-3, 24
wl-key-4, 25
wl-mac, 23
wl-mac-clone, 23
wl-rate, 25
wl-region, 25
wl-retry-time, 30
wl-scan, 25
wl-ssid, 23
wl-status, 26
wl-subnet, 20
wl-tcp-ip, 31
wl-tcp-ip2, 31
wl-tcp-port, 30
wl-tcp-timeout, 30
wl-telnet-ports, 30
wl-telnet-timeout, 30
wl-tunnel, 30
wl-tunnel-mode, 30
wl-tunnel-port, 30
wl-type, 23
wl-udap, 20
wl-udp-ip, 32
wl-udp-rxport, 32
wl-udp-xmit, 32
wl-wep, 24
wl-xmit-type, 32
CLI Commands by Model, 38
CLI Commands Descriptions
Apply SSID, 23
Average Noise Level, 27, 29
Clear Buffer, 34
Close a TCP Connection Initiated by the Serial
Host, 31
Commit System Configuration Parameters to Flash
Memory, 35
DHCP Acquire Limit, 21
DHCP Client Enable or Disable, 20
DHCP Client Host Name String, 21
DHCP Fallback Method, 21
DHCP Retransmission Mode, 21
DHCP Status, 27
Discovery Name: Device, 35
Discovery Name: Manufacturer, 35
Discovery Name: OEM, 35
Enter Data Pass-Through Mode, 31
Firmware Version String, 35
Level 1 Password, 36
Level 1 User ID, 35
Level 2 Password, 35
Level 2 User ID, 35
Level 3 Password, 35
Level 3 User ID, 35
Level 4 Password, 35
Level 4 User ID, 35
Log into the Module, 35
MAC Address of the Responding AP, 27, 29
Module Device Type, 25
Native Memory, 29
Network Data Buffers, 29
OEM Version String, 35
Outbound TCP and UDP Traffic Selection, 32
Outbound UDP Mode, 32
Primary DNS Server Address, 21
Radio Firmware Version String, 35
Raw Wireless Data Rate, 27
Read Analog Input Port, 37
Read Digital I/O Port, 36
Release Current DHCP Information and Make a
New Request, 20, 21
Report Abridged Module Status, 26
Report Comprehensive Module Status, 26
Reset All Settings to OEM Defaults, 36
Restart Firmware, 36
Return to Level 1, 36
Scan for APs and Report Status, 25
Serial Port Bit-Rate in Bits per Second (bps), 34
Serial Port Data Bits, 34
Serial Port Flow Control, 34
Serial Port Parity, 34
Service Set Identifier String, 27, 29
Set Default WEP Key, 24
Set Module to Listen Mode, 30
Set the Direction of Port E I/O Bits to Input or
Output, 36
Set the Direction of Port G I/O Bits to Input or
Output, 36
Set the Direction of Port to Input or Output, 37
Set the Number of Stop Bits, 34
Set WEP Key 1 to Binary Value, 24
Set WEP Key 2 to Binary Value, 24
Set WEP Key 3 to Binary Value, 24
Set WEP Key 4 to Binary Value, 25
Signal Level, 27, 29
Static IP Address if DHCP Client is Disabled, 20
Static Static Default Gateway/Router IP Address,
20
Static Subnet Mask if DHCP Client is Disabled, 20
UDAP Discovery Enable or Disable, 20
Up Time, 29