User`s manual

2.1 Installing a Quatech QSP-200/300 Under Windows
95/98/ME/2000
2.1.1 Windows 95/98
1. Insert the QSP-200/300 into any available PC Card socket.
2. The first time a new PC Card is installed the Add New Hardware Wizard
window opens. After the first installation, Windows 95/98 will
automatically detect and configure the card. If the Add New Hardware
Wizard window does not open, then skip to the next section, "Viewing the
QSP-200/300 Settings".
3. The Add New Hardware Wizard window provides several options to
configure the QSP-200/300 card. Click the "Driver from Disk" option
button. Click "OK" to continue.
4. Insert the QSP-200/300 Quatech COM CD into the drive, select the correct
drive letter, and click "OK". Windows 95/98 will browse for the
aforementioned files.
5. During the installation process, it may be required to supply the computer
with the Windows 95/98 CD. Insert the CD when prompted and click "OK"
.
IMPORTANT NOTE:
If the user has previously used any of the PC's COM ports
and the Windows 95/98 installation CD is not available, the
user may be able to skip this step. When prompted for the
Windows installation CD, click the "Skip" button to abort
copying of the serial communication drivers. If these drivers
are already present on the PC, the currently installed drivers
will be used.
6. The QSP-200/300 PC Card should now be configured. In the future,
Windows 95/98 will automatically recognize and configure the
QSP-200/300.
2.1.2 Window Millennium (ME)
1. Insert Quatech COM driver CD into the CD-ROM
2. Insert the QSP-200/300 into any available PC Card socket.
QSP-200/300 User's Manual 4