User manual

2.2 Changing Configuration of the QSP-200/300.
To change the hardware configuration of the QSP-200/300, follow the instructions below.
2.2.1 Windows 95/98/ME
1. Double click the My Computer icon located on the Windows 95/98/ME desktop.
2. Double click on the Control Panel icon.
3. Double click the System icon inside the Control Panel folder. This will open the
System Properties box.
4. Click the Device Manager tab located along the top of the System Properties box.
5. Double click on the device group "Quatech Comm Adapters". The QSP-200/300
model name should appear in this list. If either the "Quatech Comm
Adapters" group or the QSP-200/300 model number does not appear, contact
Quatech Technical Support for further assistance.
6. Click on the QSP-200/300 item and then click on the button labeled "Properties".
7. Un-check the box "use automatic settings". This keeps Windows from changing the
resource settings when the system is restarted.
8. Select a "Basic Configuration" from the list box. Each "Basic Configuration" is
associated with a specific set of handshake and output driver options as listed in the
table below (a functional description of these options are contained in the section
Hardware Information).
9. If a change in I/O address and / or IRQ setting is required, select the resource to be
modified (I/O or IRQ) and select "Change Settings". Make the desired changes and
then click on "OK". A shutdown of the system may be required to allow the settings
to change. If prompted for a shutdown, select the option which restarts Windows 95.
10. The QSP-200/300 will be automatically reconfigured to the desired settings.
11. The card is now ready for use.
2.2.2 Windows 2000
1. Double click the My Computer icon located on the Windows 2000 desktop.
2. Double click on the Control Panel icon.
3. Double click the System icon inside the Control Panel folder. This will open the
System Properties box.
4. Click the Device Manager button located in the center of the System Properties box.
5. Double click on the device group "Quatech Multiport Serial Devices". The
QSP-200/300 model name should appear in this list. If either the "Quatech Comm
QSP-200/300 User's Manual 10