Freedom USB Serial Adapter User's Manual

Installing the software Quatech Freedom USB Adapter User’s Manual
Figure 36 - Win 98/98SE Finished installing prompt
Figure 36 indicates that
Windows has finished installing
the software for the US
B
serial
port.
Step Procedure Description
 Step 18 Click Finish. The wizard briefly displays a series of
Unknown hardware found and
Installing messages as it installs the rest
of the serial ports. When the desktop
displays, your Freedom USB
installation is complete!
Uninstalling from Windows 98/98SE
Follow these steps in the event that you need to uninstall or reinstall
the Freedom USB software.
1. From the Control Panel, select System.
2. Select the Device Manager tab.
3. Scroll down to Multi-port serial devices and expand.
4. Highlight Quatech Freedom USB; for example, QSU-100 USB-to-
Serial Converter. Click Remove.
5. Click OK at the Confirmation screen. Note that this also removes
all the serial ports associated with your Freedom USB.
Page 28 Rev 2.02 (2/24/2004)