User's Manual

AirborneDirect™ Users Guide Quatech, Inc.

100-8510-110 2/21/2011 49

To upload configuration files follow the steps in Table 21.

Figure 15 - Upload Configuration Web Page

Table 21 - Uploading Configurations

Step

Description

Navigation Bar

Select Configuration

You will see major WLAN parameters displayed.

Feature Link

Select Upload Configuration File

You will see a window open with field to enter the

location of the configuration you want to upload, along

with a choice of OEM or User Configuration.

Press Browse... Button

This will open a dialog box in which you can locate the

certificate you wish to upload to the module. Select the

configuration file and press Open.

This will return you to the Configuration Upload window

and will have entered the location and file name of the

certificate you wish to upload in the field next to the

Browse… button.

Select User or OEM Configuration

This defines the configuration you are installing. OEM

Configurations will survive a factory reset, User will not.

Press Upload Configuration

You will then see a notice that the configuration has

been successfully uploaded to the module.

Press List Configuration Files

This will show the current configuration files resident on

the module and will include the file just uploaded.

*

Uploading a configuration file will overwrite any configuration file already stored on

the module. This will cause a change in configuration when a module restart is

performed.

IMPORTANT: Confirm that the OEM or USER settings in the configuration files will

allow the user to communicate with the module after the upload and a restart has

been completed.