User's Manual

Quatech, Inc. AirborneDirect™ User Manual
52 2/21/2011 100-8510-110
Step
Description
Press Browse... Button
This will open a dialog box in which you can locate the
firmware image you wish to upload to the module.
Select the firmware image file and press Open.
This will return you to the Upload Firmware window and
will have entered the location and file name of the
firmware image you wish to upload in the field next to
the Browse… button.
Press Load New Firmware
You will then see a notice that the firmware upload has
begun (Figure 17).
When the upload has been completed successfully and
the firmware updated w window indicating this will be
shown (Figure 18).
Press Reboot
This will restart the module and the new firmware will
be loaded.

DO NOT REMOVE POWER FROM THE MODULE DURING THE
FIRMWARE UPDATE.
This may cause the device to become non-operational. If this happens please contact
Quatech Technical Support.