User's Manual

Quatech, Inc. AirborneDirect™ User Manual
62 2/21/2011 100-8510-110
Step
Description
Select CA Certificate Filename
Enter the name of the Certificate Authority (CA)
certificate stored on the device.
Storing Certificates on the device is cover in
section 15.5.
If the network security does not require the use
of a CA certificate this field should be left
blank.
Press Commit [Button]
Saves changes to the device.
Optional
Press Reload [Button]
Reloads the WLAN Settings page. Select this
is you have further configuration options to
change.
Optional
Press Restart [Button]
Restarts the device. After the device as
rebooted it will attempt to authenticate to the
configured network. As long as the network is
in range the wireless interface will connect.
If the network is using DHCP then an IP
address will be assigned to the WLAN interface
and IP connectivity is possible over the WLAN
network.
If the network is using static IP addresses it will
be necessary to configure the network
interface, see the next step.
Feature Link
Select Network Settings
The wireless interface is now configured
however if the WLAN network does not have a
DHCP server available to provide IP address to
the device, it necessary to assign a static IP
address to the wireless interface.
Selecting Network Settings will allow us to
configure the device with a static IP address.
This is covered in section 19.0.