User's Manual

Quatech, Inc. AirborneDirect™ User Manual
76 2/21/2011 100-8510-110
3
Right Click the Unmanaged Device then:
1. Select Change Management State
2. Select Manage OEM-Cfg1
3. Select Device OEM-Cfg1 is Factory Default
4
The status of the device will move to managed and it will be displayed under the device type/group it
belongs too. To install the VCOM driver, right click the target device:
1. Select Configuration Management
2. Select Install VCOM Driver for OEM-Cfg1
5
The VCOM driver will then be installed. When completed the following message will be seen in the lower
right-hand corner.
6
The installed VCOM ports are now available for use.
7
To identify the VCOM ports right click My Computer.
Select Properties.