Owner's manual
Table Of Contents
- Reference Manual
- Overview
- Conventions
- Scope
- Supported Devices
- Overview
- Understanding the CLI
- A Typical Development System
- Serial Device Server Use
- Ethernet Bridge Use
- WLAN Security
- WLAN Roaming
- FTP Configuration
- Power Save
- Command Descriptions
- dev-type
- wl-security
- get-cert
- get-cfg
- put-cert
- put-cfg
- ca-cert-filename
- ca-cert2-filename
- client-cert-filename
- client-cert2-filename
- priv-key-filename
- priv-key2-filename
- priv-key-password
- priv-key2-password
- ? [Question Mark]
- help
- dh-parm-filename
- eap-password
- eap-ident
- eap-anon-ident
- eap-phase1
- eap-phase2
- subject-match
- subject-match2
- clear-cred
- clear
- del-cert
- clear-wep
- default-cfg
- radio-on
- radio-off
- ping
- stats
- ftp-server-address
- ftp-server-path
- ftp-user
- ftp-password
- ftp-filename
- save
- telnet-port
- http-port
- eth-ip
- eth-gateway
- eth-subnet
- eth-mode
- wl-specific-scan
- apply-cfg
- wl-assoc-backoff
- arp-reachable-time
- arp-staleout-time
- del-cfg
- discover
- intf-type
- list-cfg
- ssh-keygen
- ssh-keysize
- startup-text
- startup-msg
- ver-fw
- ver-radio
- ver-uboot
- wl-dhcp-vendorid
- wl-udp-ping
- wl-wins1
- wl-wins2
- cfg-dump
- Change Log
Quatech, Inc. Company Confidential
100-8081-100 Airborne CLI Reference Manual 101
arp-staleout-time
Command
arp-staleout-time
Arguments
[integer]
Device Type
All
Default
120
Description
The amount of time since the last observation of the IP address before scheduling that entry for
removal from the device severs internal ARP table.
Value has the range of 1-254 seconds. The default time is 120 seconds.
The device server requires a restart or power cycle for this parameter change to take effect.