User's Guide

GPScanID 100 User Operational Manual
Page 12 of 37
How to set up Time Format
The reader time format is defaulted to 12-hour format from the manufacturer.
To change or check this setting, use the / Keys to navigate to Time Format in the
Date/Time Menu and press  key or MENU/OK button to set up the Reader’s time display
format in either 12- or 24-hour time. The following screen is displayed.
Press the  key to exit back to the main Setup screen.
Setting Up Auto Update
Auto Update, if enabled, is used to automatically adjust the reader’s date/time to the same
setting when connected to an external peripheral device such as Personal Computer or
SmartPhone. The default value for Auto Update is Enabled.
To change or check this setting, use the / Keys to navigate to Auto Update in the
Date/Time Menu and press  key or MENU/OK button to select. The following screen is
displayed.
Use the / Keys to select Enable or Disable and press  key or MENU/OK button to select.