User's Guide

GPScanID 100 User Operational Manual
Page 33 of 37
7. Alerts
The reader provides a range of visual, audio and vibration alerts when in use. The following table
summarizes the events and the default alerts. You can customize certain settings by enabling or
disabling them to suit your preferences.
Events
Buzzer
Display
LED Indicators
Vibration
Power On
3 short beeps
GPScanID 100 Logo with
backlight switched on
and stays for 3 sec
Both flashes stay
on until METISID
logo disappears
3 short vibrations
Power Off
5 short beeps
Powering Off is displayed.
Screen is dimmed then
switched off
Both flashes stay
on until power off
5 short vibrations
Any of the 5
buttons are
pressed
1 short beep
Turns Screen backlit on.
Display changes accordingly to
button hit response
Read Button is
Pressed
1 short beep
1. Reading… is displayed
2. Backlight switched off
immediately
Red LED stays on
for 1 second
No Tag Read
1 long beep
No Tag Read is displayed
Red LED stays on
for 1 second
1 short vibration
A Non-Duplicate
Tag is Read
3 short beeps
1. Backlight switches on
2. RFID number displayed with
both counters incremented
Red LED flashes
once and Green
LED flashes twice
1 short vibration
Duplicate Tag is
Read
2 short beeps
1. Backlight switches on
2. RFID number displayed. Left
counter shows location of ID
already saved. Right counter
remains unchanged
Red LED flashes
once then Green
LED flashes once
1 short vibration
Restore Factory
Settings
1 long beep
(3 seconds)
‘Resetting’ is displayed for 3
seconds then screen is turned
off momentarily before
displaying the last session used
Both LED stays on
for 3 seconds
1 long vibration
(2 seconds)
Connection Lost
(Serial, Bluetooth
or WiFi connection
lost or fail during
data transfer)
One long beep
(2 seconds)
Connect Lost is displayed
Red LED flashes
twice
Memory Almost
Full (>90% used)
1 short beep
Memory Almost Full is
displayed
Red LED flashes
twice every 15
minutes
Memory Full
1 long beep
(2 seconds)
Memory Full is displayed
Red LED stays on 2
seconds every 15
minutes
Charging Battery
1 short beep
when charging
starts
Turn backlight on for 1 minute.
Battery Indicator flashes with
battery level and shows
adjacent lightning icon
Red LED stays on
Low Battery (when
battery level falls
below 10%)
1 short beep
Battery Low is displayed 1
second once every 5 minutes
Red LED flashes
twice
Sending session(s)
during data
transfer
1 short beep
when completed
Sending…
Red LED flashes
once
Receiving session(s)
during data
transfer
1 short beep
when completed
Reading…
Red LED flashes
once