GV600 User Manual GV600MG User Manual GPS Tracker QSZTRACGV600UM0106 Version: 1.
Document Title GV600MG User Manual Version 1.06 Date 2019-04-01 Status Released Document Control ID QSZTRACGV600UM0106 General Notes Queclink offers this information as a service to its customers, to support application and engineering efforts that use the products designed by Queclink. The information provided is based upon requirements specifically provided to Queclink by the customers.
Contents 0. Revision History ............................................................................................................................. 1 1. Introduction .................................................................................................................................. 2 1.1. Reference............................................................................................................................. 2 1.2. Terms and Abbreviations ...................................
GV600MG User Manual Table Index Table 1. GV600MG Protocol Reference ........................................................................................ 2 Table 2. Terms and Abbreviations ..................................................................................................... 2 Table 3. Product Model ..................................................................................................................... 3 Table 4. Parts List ....................................................
Figure Index Figure 1. The 18-pin Connector on the GV600MG....................................................................... 4 Figure 2. Open the Case .................................................................................................................... 6 Figure 3. SIM Card Installation .......................................................................................................... 7 Figure 4. Backup Battery Installation ..........................................................
GV600MG User Manual 0. Revision History Version Date Author Description of Change 1.00 2016-12-02 Rayne Wu Initial 1.01 2017-05-12 Louis Wang Updating 1.02 2018-03-16 Arry Wang Delete cargo sensor 1.03 2018-08-22 Arry Wang Add 4G Product (GV600MG) 1.04 2018-10-09 Arry Wang Add function description 1.05 2019-02-14 Arry Wang Modified contents 1.
GV600MG User Manual 1. Introduction The GV600MG is a series of compact waterproof GPS trackers designed for a wide variety of vehicle tracking applications. They have multiple I/O interfaces that can be used for monitoring or controlling external devices, including a 1-wire interface used for temperature monitoring. Bluetooth 4.2 is supported (only for GV600MG with the hardware version V1.01 or above). Virtual ignition detection and i-Button function are both supported by GV600 Series and GV600G Series.
GV600MG User Manual 2. Product Overview 2.1. GV600ME Products Table 3. Product Model Model No.
GV600MG User Manual 2.3. Interface Definition The GV600MG Tracker has an 18-pin interface connector which contains the connections for power, I/O, TTL, etc. The sequence and definition of the 18-pin connector are shown in the following figure: Figure 1. The 18-pin Connector on the GV600MG Table 5.
GV600MG User Manual 2.4. GV600MG Standard Cable Color Table 6. GV600MG Standard Cable Color Definition Definition Color Pin No. PWR1 Red 1 AGNG Black IGN Connector Pin No.
GV600MG User Manual 3. Getting Started 3.1. Open and Close the Case Figure 2. Open the Case To open: Use a cross screwdriver to loosen the four screws and then lift the top case gently. To close: Align the top case with the bottom case and then tighten the four screws. Note: Pay attention to the following details to close the case. Otherwise, the waterproof capability of the device may be deteriorated. 1.
GV600MG User Manual 3.2. Install a SIM Card Open the case and ensure the unit is powered off (unplug the 18-pin cable and switch the internal battery to the OFF position). Insert the SIM card into the holder. Take care to align the cut mark and ensure the SIM card is pushed into the SIM holder completely. Close the case. Figure 3. SIM Card Installation 3.3. Install the Internal Backup Battery GV600MG has an internal backup Li-ion battery (5800mAH). Figure 4.
GV600MG User Manual 3.4. Power Supply Connection PWR (pin 1 or pin 2)/GND (pin 3 or pin 4) are the power input pins. The input voltage range is from 8V to 32V. The device is designed to be installed in vehicles that operate on 12V or 24V systems without the need of external transformers. Figure 5. External Power Supply Connection 3.5. Ignition Detection Table 7. Electrical Characteristics of Ignition Detection Logical Status Electrical Characteristics Active 5.
GV600MG User Manual position of the vehicle ignition switch as shown above. An alternative to connect to the ignition switch is to find a non-permanent power source that is only available when the vehicle is running, for example, the power source for the FM radio. IGN signal can be configured to transmit information to the backend server when ignition is on and enter the power saving mode when ignition is off. 3.6. Digital Inputs There are four general purpose digital inputs on GV600.
GV600MG User Manual 3.7. Analogue Inputs There is one analogue input on GV600MG, and the analogue input voltage range is from 0 to 32V. The following picture shows the recommended connection. Figure 8. Typical Analogue Input Connection Note: Pin 6 is a multifunction pin: it can be configured as an analogue input. 3.8. Digital Outputs There are four digital outputs on GV600MG. All are of open drain type and the maximum drain current is 150 mA. Each output has a built-in over current PTC resettable fuse.
GV600MG User Manual Figure 10. Typical Connection with a Relay Figure 11. Typical Connection with a LED Figure 12.
GV600MG User Manual Figure 13. Typical Connection with Other Devices Note: Pay attention to the polarity of the relay if it is pre-installed with an internal flyback diode during connection. Install an additional diode externally if there is no pre-installed internal diode. A common diode such as a 1N4004 one will work in most circumstances. 3.9. Device Status and LED Table 10.
GV600ME User Manual Figure 14. GV600MG LEDs on the Case Note: 1. CELL LED cannot be configured. 2. GPS LED and PWR LED can be configured to turn off by using the configuration tool. 3. Fast flashing: for CELL LED is about 100ms ON/800ms OFF; for GPS LED and PWR LED is about 100ms ON/100ms OFF. 4. Slow flashing: for CELL LED is about 100ms ON/2000ms OFF; for GPS LED and PWR LED is about 600ms ON/600ms OFF. 3.10.
GV600MG User Manual If the cable of temperature sensor has two wires, connect the temperature sensor to GV600 following the diagram and table as below: Figure 15.
GV600MG User Manual 3.11. Serial Port/UART Interface There are two lines dedicated to the Serial Port/UART interface (TXD and RXD). TXD and RXD are standard TTL signal. Figure 16.
GV600MG User Manual 4. Supported Peripheral List Name Description Temperature Sensor 1-Wire temperature sensor DS18B20 Fuel level Sensor Digital RS232 (DUT-E COM Protocol) Ultrasonic fuel level sensor UFS300 Bluetooth Sensor BLE 4.2 protocol supported iButton Supported (should be used with iButton reader) FCC Statement: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
