User manual

GL200 User Manual
Battery Kit User Manual.pdf” for
detail.
GL200 Data Cable
(Optional accessory)
It is the USB data cable which can
be used for firmware upgrading and
configuration.
GL200 External Cable
(Optional accessory)
It is the extend cable which include
the charger interface and external
battery interface on GL200. It also
includes the ignition detection
interface on the GL200.
GL200 External GPS Active
Antenna
(Optional accessory)
External GPS active antenna is
optional according to application
scenarios.
GL200 Holder Without Magnet
(Optional accessory)
It is used to hold the GL200, mount
to somewhere with the screw.
GL200 Holder With Magnet
(Optional accessory)
It is used to hold the GL200,
attached to metal with the magnet
on it.
3.2. Battery Charging
z Please connect AC-DC power adapter with GL200.
z Insert the AC-DC power adapter into the power socket.
z During charging, the
PWR LED is flashing fast. When the battery is full charged, the PWR LED
will be Ever-light.
z You can also charge the battery by USB cable which connects GL200 with the PC.
z Charging time is about 5 hours.
Note: Before the first time using GL200, please full charge the battery.
3.3. GL200 External Cable Interface
z GL200 External Cable is a cable with a Mini USB connector and four wires which include the
external power interface and ignition detect for GL200. Please find the detail description in
following table.
TRACGL200UM001 - 10 -
Queclink
Confidential