Specifications

GV300 @Track Air Interface Protocol
3.2.4. Global Configuration
The AT+GTCFG command is used to configure the global parameters.
¾ AT+GTCFG=
Example:
AT+GTCFG=gv300,123456,gv300,,,,,,,,,,,,,,,,,,,0003$
AT+GTCFG=gv300,,,1,123.4,0,,0,1,,2FF,0,1,1,300,0,1,1,,,,0003$
Parameter Length(byte) Range/Format Default
Password 4 – 6 '0' – '9' 'a' – 'z' 'A' – 'Z' gv300
New Password 4 – 6 '0' – '9' 'a' – 'z' 'A' – 'Z'
Device Name <=10 '0' – '9' 'a' – 'z' 'A' – 'Z' gv300
ODO Enable 1 0|1 0
ODO Initial Mileage <=9 0.0 – 4294967.0Km 0.0
GPS On Need 1 0|1 0
Reserved 0
Report Composition Mask <=4 0000 – FFFF 003F
Power Saving Mode 1 0 – 2 1
Reserved 0
Event Mask <=4 0000 – FFFF 3FFF
Pin15 Mode 1 0|1 0
LED On 1 0|1 0
Info Report Enable 1 0|1 0
Info Report Interval <=5 30 – 86400sec 300
Location By Call 1 0|1 0
Echo Suppression 1 1|2 1
Backup Battery
Charge Mode
1 0|1 0
Reserved 0
Reserved 0
Reserved 0
Serial Number 4 0000 – FFFF
TRACGV300AN002 – 16 –
Queclink
Confidential