User's Manual

GSM/GPRS Module Series
M85 Hardware Design
M85_Hardware_Design Confidential / Released 14 / 88
1)
When the module works within this temperature range, the deviations from the GSM specification may
occur. For example, the frequency error or the phase error will be increased.
Table 2: Coding Schemes and Maximum Net Data Rates over Air Interface
2.4. Functional Diagram
The following figure shows a block diagram of M85 and illustrates the major functional parts.
Radio frequency part
Serial Flash
Power management
The Peripheral interface
Power supply
Turn-on/off interface
UART interfaces
Audio interfaces
SIM interfaces
SD interface
PCM interface
ADC interface
RTC interface
Size: 25.3±0.15 × 24.5±0.15 × 2.6±0.2mm
Weight: Approx. 3.3g
Firmware upgrade via UART Port
Connected to antenna pad with 50 Ohm impedance control
Coding scheme
1 Timeslot
2 Timeslot
4 Timeslot
CS-1
9.05kbps
18.1kbps
36.2kbps
CS-2
13.4kbps
26.8kbps
53.6kbps
CS-3
15.6kbps
31.2kbps
62.4kbps
CS-4
21.4kbps
42.8kbps
85.6kbps
NOTE